Pen Making Supplies Logo
Have You Signed up for our Mailing List packed with free stuff, great offers and more???
Free Catalog
Penmaking Home Penmaking Index Page Penmaking Index Page Penmaking Index Page Pen Making Kits Pen Making Supplies Pen Making Supplies Penmaking Tools WoodWorkingCrafts.com Forums Steebar Home Page Pen Making Kits
Pen Making Supplies CD-ROM Top Kit Instructions PK-1062 Pen Making Supplies
Looking for Penmaking Instruction Sheets? | Search for:
KIT FEATURES
• Heavy 24 kt. gold plated brass parts
• Quality precision components for smooth and longer spinning
• Kit can be used with either 3" or 5" CD Rom discs
REQUIRED ACCESSORIES
• 7 mm, long mandrel
• 2 pc 7 mm bushings # PK-1259
• 7 mm drill bit # PK-1173
• 7 mm barrel trimmer # PK-1391
• 2 part epoxy glue or or SG-THICK super glue

Diagram A / Parts List & Layout

Preparing the Blank

  • Cut 1'' square blank to the length of the brass tube (add 1/16'' for squaring off).
  • Drill a 7mm center hole lengthwise through the blank.
  • Spread the glue over the tubes. Insert the tube into the blank with a twisting motion to spread the glue evenly inside. Center the tube lengthwise in the blank.
  • When glue dries square the ends of the blank. Use a universal pen blank squaring jig or a belt/disc sander to square the ends. Take the wood down flush to the brass tube.

Diagram B / Turning The Blank

Turning the Blank

  • Place 7 mm spacer bushings on the mandrel. Place the glued wood blank and other 7 mm bushings or scrap material to fill the remaining space.
  • Place the knurled lock nut on, hand tight. Bring up the tail stock snug with the live center. Tighten the lock nut.
  • Turn the blank to the designed profile. For the lower end of the wood, match the dia. to the outside size of the front end.
  • Sand and finish the wood.

Diagram C - Assembly

NOTE: Line up finished parts according to dia. 'C'.

Assembly

  • Insert the "O" ring over the shaft of the tip to fit into the slot.
  • Insert the tip assembly into the hole at the front piece to the end.
  • Press the nut, recessed end in first into the wide end of the wood blank.
  • Press the spinner handle into the opposite end of the blank.
  • Insert the CD Rom hole in the recess of the front piece. Thread this assembly into the blank, hand tight.
  • The CD Rom top is now ready to spin.
 

Search our site:
Search for:

Jump directly to a specific page

Want the inside scoop?

News and information, Steebar Exclusives,
Special Offers, Free Stuff and more!

Signup Here ..

On PenMakingSupplies.com you will find a complete line of Pen making kits, supplies and turning tools for the serious pencrafter. If there's something you can't find just send us an email and we'll be glad to point you in the right direction. Don't forget to stop by our wood working craft site WoodWorkingCrafts.com.

You may also be interested in our Clock Parts and Clock Making Supplies...



P.O. Box 607  Peapack, New Jersey 07977
Phone: (908) 204-0095 Fax: (908) 204-0099
Copyright © 2005, Steebar Corp.
Penmaking supply partner sites

 

 


pen making, pen supplies, pocket watch, pendant watch, pendant watch kits, liquid glass, epoxy resin, liquid glass epoxy